ADUSBCIM USB CABLE CHECKER 2
Release date 2019/09/30
Manual (Google tlansrate)
Generally sold USB cables and adapters have standardized connector shapes, but internal wiring and resistance values vary greatly.
USB CABLE CHECKER2 is a ray of light that shines into the chaotic world of USB.
You can verify information that cannot be confirmed, such as the resistance value and compatible standards of microB and TypeC standard USB cables that are usually used for charging and data transfer.
In addition to LED lighting, it also has an OLED display to display information on a wide variety of USB cables.
It is a device that can be used for various purposes, such as selecting excellent cables with lower resistance values, whether data transfer is possible, checking OTG/host functions, and USBPD compatibility.
Product features
・From Mini-B to Type-C, from USB 2.0 to 3.2, it supports a wide range and acquires various information.
Widely compatible with the USB standard, which is becoming more and more confusing due to the spread of TypeC.
You can check the following information about commonly used "Type A or C"? -? "miniB/microB/C" shaped USB cables.
- Checking cable wire connection status
- Checking the built-in resistance value of plugs of type C cables and conversion adapters/Emarker check
- Ground fault check of plug shell
- Check cable resistance
・Equipped with an LED that shows the connection status at a glance
Easy to grasp the connection status of Type-C cables with various connection types such as 2.0, 3.1 (Gen1, Gen2), and 3.2 with many LEDs.
It is convenient to check the maximum compatible standard and the presence or absence of USBPD function.
・ Various information such as cable resistance and e-marker are displayed on the OLED screen
Measure and display the resistance value of the power supply terminal (VBUS to GND).
Furthermore, the power capacity and signal type corresponding to the pull-up resistance value of the signal line, CC pin, SBU pin, etc. are also determined and displayed.
* The displayed cable resistance is a value that includes the contact resistance of the connector of this unit.
please note!
The attached button battery is for operation check. Please remove the insulating tape before use. This product is a dedicated cable inspection device. Do not connect other USB devices. Risk of breakage.
———Notes on handling this product——— ・This product is for hobby use. Limited to personal use.・The performance of the listed parts is the performance of the parts themselves, and does not guarantee the product life.・Depending on the cable you use, you may not be able to use all functions.・This product has an exposed electronic circuit. Be careful of electric shocks, and if children are using it, please attach parental supervision.・A button battery is required for operation of this product. Please handle with care.・In the event that the customer suffers damage due to reasons attributable to our company in connection with the use of this product, we will compensate the customer for direct damage only, up to the sales price, and in any case, we will compensate the customer for damages exceeding the sales price. shall not.・Specifications are subject to change without notice for improvement. Please be forewarned.
Basic specifications [Supported USB interfaces] USB Type A (~3.1 Gen2) USB Type C (~3.2) USB Type mini B (~2.0) USB Type micro B (~2.0) USB Type C (~3.2) [Installed parts] USB Standard confirmation single color LED x15 OLED display x1 Power switch x1 Power LED x1 [Power supply] CR2032 type button battery x1 [External dimensions] H13.8xW86.85xD53.7mm (excluding protrusions) [Weight] Approx. 45g [Operating environment] Temperature 0 ~45℃, humidity 10~60% (non-condensing) [Country of origin] Made in Japan [Warranty period] 6 months from purchase [Accessories] Button battery (for operation check) 1 piece Warranty card 1 copy