ADRSZBM Zero One Temperature/Humidity/Barometric Pressure Sensor Expansion Board
SKU 4562469771830
Availability:
Out of stock
Sold out
Original price
¥3,828
-
Original price
¥3,828
Original price
¥3,828
¥3,828
¥3,828
-
¥3,828
Current price
¥3,828
Product Features?
・Compact "pHAT" size
The "pHAT" size is perfect for the compact Raspberry Pi Zero and can be stacked with the Raspberry Pi Zero!
・Equipped with BME280
A sensor module equipped with Bosch's BME280 can simultaneously measure three environmental information: temperature, humidity, and atmospheric pressure. It is also possible to connect the BME280 away from the Raspberry Pi body, which is the heat source, with the included jumper wire.
・ Grove system * (I2C) compatible connector installed?
Equipped with a connector compatible with the Grove system* (I2C), it is ideal for IoT system prototyping because it is designed to take advantage of expandability such as using servos, sensors, and actuators compatible with commercially available Grove systems. *Grove System is a registered trademark of Seeed Technology Limited.
Name of each part
please note!
General knowledge of electronic work and electronic circuits and a flathead screwdriver are required to use this product.
(*Raspberry Pi Zero body, case, and cables are not included.)
basic specifications
[Compatible models] Raspberry Pi Zero v1.3 / W / WH (v1.3,W requires soldering of GPIO pin header) Raspberry Pi 2/3 (screws may not be fixed, restart switch is Cannot be used) [LED] Status x 1
[Switch] Restart switch / Shutdown switch (Please check the web page for the operation of shutdown etc.)
[Measurement range and measurement accuracy] Temperature: -40 to +85°C, ±1°C / Humidity: 0 to 100%, ±3% / Atmospheric pressure: 300 to 1100hPa, ±1hPa
[Resolution] Temperature: 0.01°C / Humidity: 0.008% / Atmospheric pressure: 0.18Pa
[Body dimensions] W65 x D30 x H23mm (excluding protrusions)
[body weight] about 14g
[Power supply] Powered by Raspberry Pi Zero
[Accessories] 5 breadboard jumper wires (male-female)
Screw set x1 Warranty card x1
[Country of origin] Made in Japan
[Warranty period] 1 year from purchase
———Notes on handling this product———
・This product is for hobby use. For personal use only, not for commercial use without the permission of the copyright holder.
・The performance of the listed parts is the performance of the parts themselves, and does not guarantee the product life.
・Depending on your PC, Raspberry Pi and OS environment, you may not be able to use all functions. ?
・If the customer suffers damages due to reasons attributable to our company in relation to the production/use of this kit, we will compensate for the damages up to the sales price only for direct damages, and in any case, damages exceeding the sales price. shall not compensate for
・Specifications are subject to change without notice for improvement. Thank you for your understanding.
*Raspberry Pi body, case and cables are not included.
Raspberry Pi is a registered trademark of the UK Raspberry Pi Foundation. Raspberry Pi is a trademark of the Raspberry Pi Foundation. Other logos, system names, and product names are registered trademarks or trademarks of their respective companies and trademark holders.
*Grove System is a registered trademark of Seeed Technology Limited.