ADCQ1612PB Frequency Response Analyzer with Bluetooth Special Version with Booklet
SKU 4562469771274
Availability:
5+ in stock, ready to be shipped
Sale
Original price
¥14,080
Original price
¥14,080
-
Original price
¥14,080
Original price
¥14,080
Current price
¥11,264
¥11,264
-
¥11,264
Current price
¥11,264
2017/08/14
" Bluetooth Equipped Frequency Response Analyzer" is now available as a special version with a booklet about transistor technology articles! !
You can read Gokan-sensei's commentary on the web!
Product Summary
Transistor Technology Feb. 2017 issue - May 2017 Transistor Tech. Feb. 2017 issue - May 2017 This is a special version in which the corresponding article published in the issue is attached as a booklet.
Introducing a response analyzer with a bandwidth of 1 MHz that is indispensable as an assist tool for experiments and research using Windows PCs and Android tablets equipped with Bluetooth.
It is also possible to apply a continuously varying sine wave from 10 Hz to 10 MHz with a sweep function to the device under test, plot the response (level) on a graph, and display the decibel value at the same time.
This analyzer has specs that can sufficiently measure and evaluate the frequency characteristics of sensor amplifiers and audio amplifiers.
*A separate AC adapter is required for use. (DC jack: inner diameter 2.1mm, outer diameter 5.5mm center plus DC 6V)
Special version with transistor technology booklet
Detailed explanation of this product! The relevant articles published in the February to May 2017 issue of Transistor Technology are attached as a booklet!
Frequency Response Analyzer with Bluetooth !
A ranger 60 to +10 dBV response analyzer with a bandwidth of 1 MHz that can be used for experiments and research using Windows PCs and Android tablets.
Equipped with a dedicated power supply circuit that takes noise into consideration !
It has a noise-conscious power supply circuit and separates a dedicated power supply circuit so that the noise of the internal digital circuit does not mix with the analog circuit.
Equipped with fixed output function
The frequency entered in the text box can be output continuously, and the output level of the device under test can be displayed in decibels. *The maximum frequency setting is 10MHz
Sweep function
A continuously varying sine wave from 10Hz to 10MHz is applied to the device under test, and its response (level) is measured and plotted on a graph, while decibel values can also be displayed.
*Frequency update interval is about 50msec, updated in 1/10 step
Equipped with data save/delete read function
The drawn graph can be saved in a file as array data. It is also possible to read out and redraw, or to delete by specifying a file.
【please note! ] This product does not come with an AC adapter. Please prepare an AC adapter separately. (DC 6V inner diameter 2.1mm, outer diameter 5.5mm center plus)
Product Specifications
Model ADCQ1612PB
JAN?4562469771274
[Wireless communication function] Bluetooth V2.1 + EDR compatible [Output] Frequency range: 10Hz to 10MHz
*Minimum step: 1/4Hz Maximum output level: 6.6Vp-p
[Input] Adjustment range: +10dB to -60dB
Resolution: 0.1dB
Frequency characteristics: DC to 10MHz
[Display function] Graph display resolution 1500 x 1050 dots Horizontal axis: Logarithmic scale from 10Hz to 10MHz Vertical axis: 10dB to -60dB
(7 inch tablet Android V6.0 Display resolution 1920 x 1200 dots Windows compatible)
[Consumption current]: Average 50mA (when Bluetooth is on standby) Maximum 80mA (when transmitting via Bluetooth)
[Power supply] Supplied from AC adapter (inner diameter 2.1 mm, outer diameter 5.5 mm, center plus DC 6 V) (AC adapter is not included with this product)
[Size] W117.45 x H16.5 x D66mm
[Weight] about 37.5g
[Assembled accessories] 1 warranty card (AC adapter not included)
[Operating temperature] 0 to 40°C (no condensation)
[Country of origin] Made in Japan
———Notes on handling this product———
・This product does not come with an AC adapter. Please prepare separately.
・For detailed usage, please refer to the February 2017 issue of Transistor Technology published by CQ Publishing.
・This product is for hobby use.
・The performance of the listed parts is the performance of the parts themselves, and does not guarantee the product life.
・Depending on your PC, Android and OS environment, you may not be able to use all functions.
・A separate internet environment is required to install the application software.
・Depending on some applications, the functions of this product may not be available.
・If the customer suffers damages due to reasons attributable to our company in relation to the production/use of this kit, we will compensate for the damages up to the sales price only for direct damages, and in any case, damages exceeding the sales price. shall not compensate for
・Specifications are subject to change without notice for improvement. Thank you for your understanding.
Other logos, system names, and product names mentioned are registered trademarks or trademarks of their respective companies and trademark holders.
About the assumed storage case
Assumed storage case: Takachi LC135-N
In addition, an output adjustment volume knob (6 mm D type) is required.
・Windows version application simple operation manual [ p=5194 ]
・Case processing drawing [ lc135-n.pdf ]
・Circuit diagram [ Response analyzer circuit diagram.pdf ]
Example of use
" Bluetooth Equipped Frequency Response Analyzer" is now available as a special version with a booklet about transistor technology articles! !
You can read Gokan-sensei's commentary on the web!
Product Summary
Transistor Technology Feb. 2017 issue - May 2017 Transistor Tech. Feb. 2017 issue - May 2017 This is a special version in which the corresponding article published in the issue is attached as a booklet.
Introducing a response analyzer with a bandwidth of 1 MHz that is indispensable as an assist tool for experiments and research using Windows PCs and Android tablets equipped with Bluetooth.
It is also possible to apply a continuously varying sine wave from 10 Hz to 10 MHz with a sweep function to the device under test, plot the response (level) on a graph, and display the decibel value at the same time.
This analyzer has specs that can sufficiently measure and evaluate the frequency characteristics of sensor amplifiers and audio amplifiers.
*A separate AC adapter is required for use. (DC jack: inner diameter 2.1mm, outer diameter 5.5mm center plus DC 6V)
Special version with transistor technology booklet
Detailed explanation of this product! The relevant articles published in the February to May 2017 issue of Transistor Technology are attached as a booklet!
Frequency Response Analyzer with Bluetooth !
A ranger 60 to +10 dBV response analyzer with a bandwidth of 1 MHz that can be used for experiments and research using Windows PCs and Android tablets.
Equipped with a dedicated power supply circuit that takes noise into consideration !
It has a noise-conscious power supply circuit and separates a dedicated power supply circuit so that the noise of the internal digital circuit does not mix with the analog circuit.
Equipped with fixed output function
The frequency entered in the text box can be output continuously, and the output level of the device under test can be displayed in decibels. *The maximum frequency setting is 10MHz
Sweep function
A continuously varying sine wave from 10Hz to 10MHz is applied to the device under test, and its response (level) is measured and plotted on a graph, while decibel values can also be displayed.
*Frequency update interval is about 50msec, updated in 1/10 step
Equipped with data save/delete read function
The drawn graph can be saved in a file as array data. It is also possible to read out and redraw, or to delete by specifying a file.
【please note! ] This product does not come with an AC adapter. Please prepare an AC adapter separately. (DC 6V inner diameter 2.1mm, outer diameter 5.5mm center plus)
Product Specifications
Model ADCQ1612PB
JAN?4562469771274
[Wireless communication function] Bluetooth V2.1 + EDR compatible [Output] Frequency range: 10Hz to 10MHz
*Minimum step: 1/4Hz Maximum output level: 6.6Vp-p
[Input] Adjustment range: +10dB to -60dB
Resolution: 0.1dB
Frequency characteristics: DC to 10MHz
[Display function] Graph display resolution 1500 x 1050 dots Horizontal axis: Logarithmic scale from 10Hz to 10MHz Vertical axis: 10dB to -60dB
(7 inch tablet Android V6.0 Display resolution 1920 x 1200 dots Windows compatible)
[Consumption current]: Average 50mA (when Bluetooth is on standby) Maximum 80mA (when transmitting via Bluetooth)
[Power supply] Supplied from AC adapter (inner diameter 2.1 mm, outer diameter 5.5 mm, center plus DC 6 V) (AC adapter is not included with this product)
[Size] W117.45 x H16.5 x D66mm
[Weight] about 37.5g
[Assembled accessories] 1 warranty card (AC adapter not included)
[Operating temperature] 0 to 40°C (no condensation)
[Country of origin] Made in Japan
———Notes on handling this product———
・This product does not come with an AC adapter. Please prepare separately.
・For detailed usage, please refer to the February 2017 issue of Transistor Technology published by CQ Publishing.
・This product is for hobby use.
・The performance of the listed parts is the performance of the parts themselves, and does not guarantee the product life.
・Depending on your PC, Android and OS environment, you may not be able to use all functions.
・A separate internet environment is required to install the application software.
・Depending on some applications, the functions of this product may not be available.
・If the customer suffers damages due to reasons attributable to our company in relation to the production/use of this kit, we will compensate for the damages up to the sales price only for direct damages, and in any case, damages exceeding the sales price. shall not compensate for
・Specifications are subject to change without notice for improvement. Thank you for your understanding.
Other logos, system names, and product names mentioned are registered trademarks or trademarks of their respective companies and trademark holders.
About the assumed storage case
Assumed storage case: Takachi LC135-N
In addition, an output adjustment volume knob (6 mm D type) is required.
・Windows version application simple operation manual [ p=5194 ]
・Case processing drawing [ lc135-n.pdf ]
・Circuit diagram [ Response analyzer circuit diagram.pdf ]
Example of use