WeAct

Resolution: 80x160 pixels, USB CDC secondary screen

MX1.25 SH1.0 to 2.54mm DuPont Wire Conversion Cable (10-pin)

MX1.25 SH1.0 to 2.54mm DuPont Wire Conversion Cable (4-pin)

MX1.25 SH1.0 to 2.54mm DuPont Wire Conversion Cable (8-pin)

I/O voltage: 3.3V, 4-Line SPI, Driver: AiP31567(ST7567)

PCM5100A, 4Ω, 2.8W x 2

PCM5100A, 32Ω, 160mW

Dual Input, Single Output Input voltage: 3.3-5.5V Output current: 2.5A

Input voltage: Max. 36V Output voltage: 12V± 3% Output current: Max. 0.6A

Input voltage: Max. 36V Output voltage: 5V± 3% Output current: Max. 0.6A

Input voltage: Max. 36V Output voltage: 3.3V± 3% Output current: Max. 0.6A

Measurement range (humidity): 0 to 100% RH Measurement range (temperature): -40 to +100°C Accuracy: ±3% RH(25°C), ±0.5°C

Measurement range (humidity): 0 to 100% RH Measurement range (temperature): -40 to +85°C Accuracy: ±2% RH (25°C), ±0.3°C

RP2350B0A4 150MHz, 16MB ROM, 520KB RAM

RP2350A 150MHz, 16MB ROM, 520KB RAM

Cortex-M33 250MHz, 128KB ROM, 32KB RAM

Cortex-M0 80MHz, 128KB ROM, 32KB RAM

Cortex-M4 170MHz, 512KB ROM, 128KB RAM

Cortex-M33 250MHz, 512KB ROM, 274KB RAM

Cortex-M33 250MHz, 1MB ROM, 640KB RAM

Product application examples - Daily monitoring of real-time PC status from your desk - Displaying information with minimal burden or...

This is a USB-RS485 adapter. Up to 2Mbps 5V level A 1kΩ pull-down resistor and a 120Ω termination resistor can be set. Pleas...

This is a USB-CAN adapter with built-in SLCAN protocol. Please refer to the Github page for data and usage instructions. Data Link https...

This is a black and white 4.2-inch e-ink display module. Data and instructions for use can be downloaded from the Github page. Display...