![AD00018 Transparent seal type touch switch (simple type)](http://btoshop.jp/cdn/shop/products/AD00018_690x518.png?v=1611373586)
AD00018 Transparent seal type touch switch (simple type)
SKU 4562469774237
Availability:
Only 2 left!
Original price
¥2,728
-
Original price
¥2,728
Original price
¥2,728
¥2,728
¥2,728
-
¥2,728
Current price
¥2,728
It is a module set that can realize capacitive touch at low cost.
This is a capacitive touch switch that uses a transparent electrode film as a sensor.
Capacitive touch sensors can be constructed at a lower cost than sensors using ITO.
It can be used as a touch sensor (switch) immediately just by connecting the power supply and signal line.
![The transparent film can be used as the sensor part of the touch switch.](https://cdn.shopify.com/s/files/1/0512/2264/2842/files/AD00018_4-300x170.jpg)
Free design is possible
Double-sided tape is attached to both sides of the film, making it easy to apply.
A plastic case or acrylic plate with a thickness of about 2 mm can be pasted on the back and used.
![An extremely thin transparent film type.](https://cdn.shopify.com/s/files/1/0512/2264/2842/files/194aa65d1df4cef5d47f4a331fa53c44-300x200.jpg)
Relay contact specification that can be used as a touch sensor immediately!
![tcuh01](https://cdn.shopify.com/s/files/1/0512/2264/2842/files/tcuh01.jpg)
With a terminal block and relay contact output that can be easily attached with a flathead screwdriver,
It can be used as a touch sensor (switch) immediately just by connecting the power supply and signal line.
The switch operation can be switched between "momentary/alternate".