ADAUDIR Arduino dedicated learning remote control board
Only 3 left!
Original price ¥6,908 - Original price ¥6,908
Original price ¥6,908
¥6,908 - ¥6,908
Current price ¥6,908
Turn Arduino into a high-performance learning remote controller! "Learning remote control board for Arduino"
The learning remote control board for Arduino is an expansion board that allows you to operate your Arduino as an advanced infrared learning remote control.
10 switches are mounted on the board, and infrared remote control signals can be recorded in the board body for each switch.
In addition, the Bit Trade One website has released more than 2,500 remote control codes for each company, from home appliances to air conditioners.
Users can freely select remote control codes to create original high-performance remote controls.
From home appliances to air conditioners! More than 2500 remote control codes released by each company! !
More than 2,500 remote control codes for each company, from home appliances to air conditioners, are now available on the Bit Trade One website!
Users can freely select and create original high-performance remote controls.
Click here for the remote control code (common to Rz-Pi)
Perfect fit for Arduino!
An infrared learning remote control expansion board that fits your Arduino just the right size.
Selectable power supply! Even a single remote control board! It can also be used in combination with the Arduino!
Power is supplied from the micro USB connector installed on the board, so remote control codes can be transmitted with the board alone without an Arduino.
In addition to power supply from the Arduino itself, power can also be supplied from the micro USB connector on the board.
A wide transmission range that covers a hemispherical sphere!
By mounting 9 infrared light emitting diodes radially, the transmission range is supported on the hemisphere,
By manipulating the Arduino's I/O pins, you can send out learned infrared remote control signals over a wide area.
Equipped with a large-capacity buffer, supporting infrared data recording with plenty of room
The general consumer electronics association format is about 6 bytes, and the storage buffer of this product has a large capacity of 300 bytes.
It is possible to record 50 times the length of the consumer electronics association format.
Basic specifications [Compatible models] Arduino Uno Rev3
[Recordable switch] 10 [Corresponding infrared frequency] 38kHz
[Memory buffer] 300 bytes per channel x 10
[Dimensions] H20xW70xD54mm (excluding protrusions).
[Weight] about 20g
[Operating environment] Temperature 0-45°C, Humidity 10-60% (no condensation)
[Country of origin] Made in Japan
[Warranty period] 1 year from the date of purchase
———Notes on handling this product———
・This product is for hobby use. Limited to personal use.
・The performance of the listed parts is the performance of the parts themselves, and does not guarantee the product life.
・Depending on your PC, Arduino and OS environment, you may not be able to use all functions.
・Depending on some applications, the functions of this product may not be available.
・This product has an exposed electronic circuit. Be careful of electric shock, and use parental supervision when children are using it.
・In the event that the customer suffers damage due to reasons attributable to our company in connection with the use of this product, we will compensate the customer for direct damage only, up to the sales price, and in any case, we will compensate the customer for damages exceeding the sales price. shall not.
・Specifications are subject to change without notice for improvement. Please be forewarned.
* Arduino body, case and cables are not included.
Other logos, system names, and product names mentioned are registered trademarks or trademarks of their respective companies and trademark holders.