Skip to content
In-stock items ship next business day!
In-stock items ship next business day!

ADRPTB8C General-purpose motor control board for Raspberry Pi

SKU 4562469771304
Availability:
Out of stock
Sold out
Original price ¥6,028 - Original price ¥6,028
Original price ¥6,028
¥6,028
¥6,028 - ¥6,028
Current price ¥6,028

We want software engineers to use it! !


Safe and secure general-purpose motor control board that does not require soldering


ADRPTB8C



Product Summary


The general-purpose motor control board, which was announced at Maker Faire?
Developed for software engineers who are unfamiliar with hardware control, the general-purpose motor control board does not require soldering, and prevents damage to the Raspberry Pi itself due to mistakes in power and voltage that often occur when controlling motors with a Raspberry Pi. It is a control board that is easy for software engineers to check, such as how much control is possible by preventing it and "visualizing" the control signal.

Versatile and well-balanced input/output support as a general-purpose motor control board


Supports 6 input/output channels (both analog input and digital input/output), 5 V compatible analog input 2 channels, PWM output 8 channels, and motor output 2 channels.

*This product is not compatible with three-phase motors.

High extensibility that does not require soldering and can be used as a stack.


By using a 24-pole screwless terminal block, soldering is unnecessary while supporting a variety of inputs and outputs. Furthermore, it enables address selection for advanced users, and multiple stacks of this product can be used. (up to 4 stacks)

Protect your Raspberry Pi from careless mistakes in current and voltage!


Did you know that Raspberry Pi's GPIO actually has weak input protection!?
In some cases, careless mistakes in current and voltage can damage the Raspberry Pi. Even if you make such a mistake, this product will protect the Raspberry Pi with the input protection by the built-in analog IC! Even software engineers unfamiliar with hardware can safely and securely conduct experiments.

Visualization of control signals!


LEDs are installed so that you can check PWM and signals from each part of the motor. By "visualizing control signals", you can check the extent of control, including forward/reverse rotation, without actually connecting the motor. Is possible.

DSCF3988


Product Specifications
[General purpose input/output] Digital input/output 6ch GPIO input/output range of Raspberry Pi: 0 to 3.3V
・Analog input 6ch, 12bit Input range: 0 to 3.3V? ・Analog input 2ch, 12bit Input range: 0 to 6.6V
* Digital input/output (GPIO) 6ch and analog input 6ch cannot be used at the same time.

・Analog input 6ch: MCP3208 12bit 8ch A/D converter SPI
Sampling rate: 50ksps Input range: 0-3.3V
・Analog input 2ch ・MCP3208 12bit 8ch A/D converter SPI
Sampling rate: 50ksps Input range: 0-6.6V
[PWM output] 8ch: PCA9685 12bitPWM, 16ch (6ch used for TB6612) I2C
* When controlling a servo motor with PWM output, simultaneous use with a DC motor will be more difficult in terms of software.
When using a servo motor and a DC motor at the same time, we recommend stacking them.

[Motor output] 2ch: Output current 1.2A TB6612 Dual DC motor driver Forward/reverse/short brake/stop control function PWM output: Controlled by PCA9685
Supports both 3.3V and 5V voltage systems ・3.3V? I2C: Direct signal from Raspberry Pi (2.7kΩ pulled up)
・5V? I2C: PCA9517 level conversion I2C Repeater
PWM power supply and motor power supply can be supplied externally ・Power supply for PWM: 5V
・Motor power supply: 5 to 12 V
・Select the internal power supply with the pin header on the board
[Connector part]
[General-purpose input/output] 6ch 3-pin (SIG+3.3V+GND)/ch (using 24-pole screwless terminal block)
[Analog input] 2ch 3-pin (SIG/+5V/GND)/ch (using a 24-pole screwless terminal block)
[PWM output] 8ch 3pin (SIG+5V+GND)/ch 2.54pitch, pin header

[Motor output] 2ch 2-pin (SIG+, SIG-)/ch (using two 2-pole screwless terminal blocks)
Compatible with both 3.3V and 5V: I2C
I2C 4-pin for 3.3V (3.3V, SCL, SDA, GND)/ch 2.54pitch, pin header I2C 4-pin for 5V (5V, SCL, SDA, GND)/ch 2.54pitch, pin header [External power input]
・PWM power supply: 2-pole screwless terminal block ・Motor power supply: 2-pole screwless terminal block [Body weight] Approx. 39g
[Size] W64 x D71 x 22Hmm (excluding protrusions)
[Accessories] 4 spacers M2.6 x 13mm, 8 screws M2.6 x 6mm, 1 warranty card (Raspberry Pi is not included)
[Warranty period] 1 year from purchase [Operating temperature] 0 to 40°C (no condensation)
[Country of origin] Made in Japan
[Model number] ADRPTB8C [JAN] 4562469771304
・The performance of the listed parts is the performance of the parts themselves, and does not guarantee the product life. In addition, there may be restrictions on the described functions depending on your environment. ———Notes on handling this product———
・Depending on some applications, the functions of this product may not be available.
・In the event that the customer suffers damage due to reasons attributable to our company in connection with the production/use of this product, we will compensate for the damage up to the sales price only for direct damage, and in any case damages exceeding the sales price. shall not compensate for
・Specifications are subject to change without notice for improvement. Thank you for your understanding.
Other logos, system names, and product names mentioned are registered trademarks or trademarks of their respective companies and trademark holders.
*Raspberry Pi body, case and cables are not included.
Raspberry Pi is a registered trademark of the UK Raspberry Pi Foundation. Raspberry Pi is a trademark of the Raspberry Pi Foundation.
Other logos, system names, and product names mentioned are registered trademarks or trademarks of their respective companies and trademark holders.


Each pin arrangement (separate table)

ADRPTB8C-middle paper_assembled