b01524 TXS0108EPWR 8-Bit Bidirectional Voltage Level Shifter Open Drain Pack of 5

The 8-bit non-inverting translator employs two independent configurable power rails. The A port follows the supply voltage of the VCCA pin, and the VCCA pin can supply a supply voltage between 1.2V and 3.6V. The B port follows the supply voltage of the VCCB pin, and the VCCB pin can be supplied with a supply voltage between 1.65V and 5.5V. Two input supply pins allow low voltage bi-directional translation between any voltage node of 1.2V, 1.8V, 2.5V, 3.3V and 5V.

All outputs are in a high impedance (Hi-Z) state when the output enable (OE) input is low.

OE must be tied to GND with a pull-down resistor to ensure a Hi-Z state during power-up or power-down. The minimum value for this resistor is determined by the current sourcing capability of the driver.

Voltage Level Translator Bidirectional 1 Circuit 8 Channel 60Mbps 20-TSSOP

Features <br> No direction control signal required Maximum data rate
110Mbps (push-pull)
1.2Mbps (open drain)
1.2V to 3.6V (A port), 1.65V to 5.5V (B port) (VCCA≤VCCB)
No Power-Up Sequencing—Can Be Powered Up from Either VCCA or VCCB
JESD 78, Class II Compliant with >100mA Latch-Up Performance
ESD Protection Exceeds JESD 22 (A Port)
2000V, human body model (A114-B)
150V, machine model (A115-A)
1000V, charged device model (C101)
IEC 61000-4-2 ESD (B port)
Contact discharge: ±8kV
Air discharge: ±6kV
document