MMFILM illumination support film "Diffuser" "Light Enhancement"
"Light Reflecting Light Enhancement Film" increases the reflectivity of LED light, improving illuminance, reducing unevenness, and enabling wider lighting range.
The "Light Diffusion Diffuser Film" has high light diffusion properties, and by applying it to the front or back of the clear parts of the LED light-emitting section, it reduces the appearance of the LED as a ball, diffuses the light, and achieves surface illumination.
Nowadays, incorporating LEDs into models is becoming more common, and now we have a product that can dramatically enhance the lighting effect simply by sticking it inside.
Product Details
MMDFSF Light Diffusion Diffuser Film
Product application examples
When surface illumination is required. For making miniature signs.
Even if it's unpainted, you can achieve a diffusion effect by simply sticking it on a clear surface!
Product Features
Highly diffusing film. Can be used on either side!!
This product is a film with high light diffusion properties. By applying it to the front or back of the clear LED light-emitting part, it diffuses the LED light and allows it to be emitted from the surface.
High elongation allows it to conform to curved surfaces
It has an extremely high elongation rate of 180% and uses a pressure-sensitive adhesive, giving it excellent conformability to curved surfaces.
By combining it with a separate enhancement film (MMEHS), it is possible to maintain uniform brightness all the way to the edges.
Note
- When applying, remove any moisture or oil from the surface and avoid applying to dirty or uneven surfaces.
- There is no light blocking function to the outside.
| Product size | A6 size, approximately 105mm x 148mm |
| Thickness | 80µm (including adhesive) |
| color | milky white |
| Adhesive type | Pressure-sensitive permanent type |
| Tensile strength | Approx. 30N/25mm |
| Growth rate | Approximately 180% |
| material | Polyvinyl chloride |
| Operating temperature range | -20℃ to 65℃ |
MMEHSF Light Reflection Light Enhancement Film
Product application examples
Reflective material inside the light emitting area!
No painting required! Simply stick it inside the model to create a light source reflection effect, so even modelers who don't paint can enhance the decorative effect!
Product Features
- By sticking it near the light source inside the model, the diffuse reflectance of the LED can be increased, improving illuminance and reducing uneven light.
・Even if some wrinkles occur when applying, the reflective and diffusing effects will not be affected. By applying it in strips, it can be used on complex concave surfaces!
- Effective when used on the inside of all light sources.
- By combining it with a separate diffuser film (MMDFSF) that diffuses light, it is possible to maintain uniform brightness all the way to the edges.
Note
- When applying, remove any moisture or oil from the surface and avoid applying to dirty or uneven surfaces.
- There is no light blocking function to the outside.
| Product size | A6 size, approximately 105mm x 148mm |
| Thickness | 140µm (including adhesive) |
| Diffuse reflectance | 94.5% |
| color | Matte White |
| Adhesive type | Pressure-sensitive permanent type |
| Tensile strength | Approx. 30N/25mm |
| Growth rate | Approximately 120% |
| material | Polyvinyl chloride |
| Operating temperature range | -20℃ to 65℃ |